Selling windows into Australia: what you need isn't a membership — it's proof
Your product can sell in Australia. The real barrier isn't joining an association — it's proving how your product performs, in a way Australia accepts. We provide that proof, independently.
A lot of Chinese factories and their Australian importers believe you must join WERS and become an AGWA member to sell windows into Australia. You don't. This guide sets out what Australia's rules actually require — and separates what is mandatory from what is not.
What Australia actually requires
Mandatory · you must have it
AS 2047 — Windows and external glazed doors
A mandatory standard, referenced directly in the National Construction Code (NCC), for every window used in Australia — whether made locally or imported. It covers structural wind load, water penetration, air infiltration and ultimate strength, tested at a NATA-accredited (or equivalent) laboratory. No AS 2047, no going on the building.
Mandatory outcome · flexible method
Energy (NCC: NatHERS residential / Section J commercial)
Windows must meet the NCC's energy provisions. That needs a U-value and SHGC for your actual system. The outcome is required — but how you prove it has several accepted pathways. WERS is only one of them, not the only one.
New in NCC 2025
Condensation & mould (NCC Parts F8 / H4)
From NCC 2025, condensation control is a compliance item — a surface-temperature / Mould-Index check at the critical junctions. It's the thing imported systems most often overlook, and where they most often fail.
Where it applies
Fire (combustible frames like uPVC, in Class 2+ buildings)
Where a combustible frame (e.g. uPVC) is used in multi-storey / certain building classes, compliance is shown through a fire-engineered Performance Solution.
One thing to be clear about: WERS is not mandatory
WERS (the Window Energy Rating Scheme) is a voluntary industry labelling scheme, run by AGWA (the Australian Glass and Window Association). It was built to compare generic products on a standard size — not to certify the specific window that actually gets installed on your project.
Energy performance does have to be proven — but WERS isn't the only way to prove it. It can be demonstrated by project-specific thermal modelling to ISO 15099 / NFRC 100 — the same international method WERS itself rests on — run on your own system. In other words: you don't have to be tied to a membership scheme just to comply.
AGWA membership — or being in WERS — isn't a legal precondition to sell here either. That route typically means an annual membership fee, factory audits and inspections you accommodate and pay toward, a rating fee for every product, and handing your CAD drawings and design data into the scheme — all of it ongoing.
And worth knowing: AGWA, which runs WERS, is a joint applicant in the current anti-dumping case against imported aluminium windows. Which path you take is your call — we're the independent one, and we're not part of that.
Why independent modelling suits a factory or importer better
It's your real system and sizes — the actual window on the project, not a standard test size. Larger project windows carry a smaller frame fraction, so they often read better (a lower U-value).
The report is yours — your branding, evidence you control, handed straight to the certifier, not parked inside someone else's membership database.
Every metric from one model — U-value / SHGC / visible light, condensation (Mould Index), embodied carbon, recyclability, weight.
Faster, no gate — no association to join, no queue, no wait.
We don't sell windows and we don't judge anyone's product. We make a good product provable in Australia — the one thing a factory can't export along with the goods.
Who we are
AFRC Lab is an independent, product-neutral window and façade thermal-performance consultancy in Melbourne. We model the real windows on a project to ISO 15099 / NFRC 100 and produce certifier-ready compliance evidence. Our own CFL 2-D thermal solver has been checked against LBNL THERM (Lawrence Berkeley National Laboratory) more than 1,000 times, junction by junction, at about 99% agreement and a median difference of about 0.6% — logged in a public register. For over nine years we've done exactly this — helping window makers and importers prove their products for the Australian market. It's the work we know best. Our founder, David Morehouse, has worked with Chinese manufacturing for the Australian market since 2006 — twenty years — and has twice presented at AusFenex, once on the Australian market itself. Bring that step to us.
Note: AFRC Lab is a company, and is not affiliated with — nor certifying on behalf of — "the AFRC" (the Australian Fenestration Rating Council behind WERS) or AGWA. We model and prove; final compliance is confirmed by the project's certifier. Modelled results are indicative to the systems and sizes provided.
Start with one window, modelled free
Send us one of your windows (drawings / section details — DWG or DXF) and we'll model it free, so you can see exactly where your product sits against Australia's requirements. Then we load your whole catalogue into BTW.